Trad-Fr
Logiciels => Divers => Discussion démarrée par: stephanie_02 le 27 février 2007, 00:29:01
-
bonjour je vous envoi ce qui est marquer quand le graveur arrete
merci de maider
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 18:35:34
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <HL-DT-ST DVD-RAM GSA-H22N>Version: 1.01 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22N atapi Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD800JD-60LSA5 SiSRaid1 Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H22N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490800kB)
Free physical memory: 109MB (111740kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.2.2007
NeroAPI
18:03:31 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
18:03:31 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
18:03:31 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
18:03:31 #4 Text 0 File Reader.cpp, Line 127
Reader running
18:03:31 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
18:03:31 #6 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD-RAM GSA-H22N running
18:03:31 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
18:03:31 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
18:03:31 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
18:04:04 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
18:04:04 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
18:04:04 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD-RAM GSA-H22N, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
18:04:04 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD-R DL; DVD+R DL.)
18:04:04 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [HL-DT-ST DVD-RAM GSA-H22N]
--------------------------------------------------------------
18:04:04 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD-RAM GSA-H22N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00
18:04:04 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
18:04:04 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
18:04:04 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
18:04:04 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11 080 KB/s)
18:04:04 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
18:04:04 #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
18:04:04 #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
18:04:04 #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
18:04:04 #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
18:09:39 #25 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x00CF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x80
Sense Qual: 0x04
CDB Data: 0x2A 0x00 0x00 0x05 0x06 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x80 0x04
18:09:39 #26 CDR -400 File Writer.cpp, Line 311
Unspecified target error
18:09:39 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:09:39 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
18:09:39 #29 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 329343
18:09:39 #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11 080 KB/s)
18:09:39 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
18:09:39 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2005-02-01 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 2005-01-27 19:08:02 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 2005-01-27 19:07:34 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 2005-01-27 19:08:08 (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
-
bonjour.... :wink:
Stephanie pas la peine de creer un nouveau post....
continue dans >celui-ci< (http://www.forum.trad-fr.com/viewtopic.php?t=5556)....
en cliquant Repondre au lieu de Nouveau....
donc je pense qu'un GM va nous arranger ça....
GM: gentil moderateur....
@+.... :wink:
-
Bonjour Stéphanie :D
Voici quelques remarques issues de la lecture du log (certaines n’ont pas forcément un lien direct avec ton pb).
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22N atapi Port 0 ID 0 DMA: Off
Activer le DMA. Voir >>ICI<< (http://www.forum.trad-fr.com/viewtopic.php?t=1912).
Memory in use : 77 %
La mémoire est bien sollicitée. Essayer de réduire en fermant des applications et des services inutiles.
Burn process started at 8x (11 080 KB/s)
Tu peux envisager de commencer à graver à une vitesse moindre.
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Tu utilises des DVD-R avec un dye Taiyo Yuden (d’excellente qualité a priori) mais il semble qu’il y ait quelques petits soucis d’identification du média. D’une manière générale, il est utile de vérifier quels sont les disques que recommandent le constructeur du graveur et s’y tenir. Eventuellement MàJ le firmware si disponible pour permettre la prise en charge de plus de MID.
@+++ Room |312| :wink:
-
Salut,
donc je pense qu'un GM va nous arranger ça....
Malheureusement, il n'est pas possible d'associer deux sujets.
Dan :wink: